價格：免費
更新日期：2019-07-09
檔案大小：32.9 MB
目前版本：1.5.2
版本需求：需要 iOS 11.0 或以上版本。與 iPhone、iPad 及 iPod touch 相容。
支援語言：日語, 英語
Brevet Manager develop brevet plan recursively by entering riding speed and staying time to each PC and point. At Brevet day, this application execute the plan we created, then track progress by recording the arrival and departure times of each PC, and we can intuitively grasp how much advance / lag is "saving time".
For details of the application, please see the following site.
https://bremaneroom-en.blogspot.com/p/what-brevet-manager-is.html
This application is free, but there is limitation on the number of plans you can create, and advertisements are displayed. If you purchase a premium feature, the restriction will be lifted and advertisements will not be displayed.
--- Brevet planning ---
Brevet Manager creates a plan by entering PCs and finish points according to the cue sheet. Calculate the arrival / departure times for each PC from the riding speed and staying time, and finally calculate the arrival time of the finish point.
Brevet Manager develop plan with following five kinds of points.
1. Start point
It is the starting point of the Brevet. Sets the start time of the Brevet.
2. Check point
Time-limited passing point. When you enter the point distance, its open and close times are set automatically.
3. Secret point
Passing point with no time limit. The difference with Check Point is only the presence or absence of time limit.
4. Point
Although this is not mandatory passage on the Brevet, register the point you want to incorporate into the plan. For example, you can register a gourmet point, sightseeing point, accommodation point etc, and incorporate staying time into the plan.
5. Finish point
It is the finish point of the Brevet.
You can change the riding speed and stay time at any time, and the correction contents are automatically reflected in Brevet plans. Considering the influence on each point and finish point, you can revise the traveling time and staying time recursively and develop the plan.
The arrival time of each point is calculated from the interval distance and the riding speed, and the departure time is calculated by adding the staying time to the arrival time. It is fundamental logic in this application to accumulate this calculation up to the finish point and calculate the total time.
In some cases, you may want to specify the arrival time and calculate the riding speed. In other cases, you may need to specify the departure time regardless of staying time. In this application, allow these options also.
Brevet Manager allow you to create plans for BRM 200, BRM 300, BRM 400, BRM 600, BRM 1000, BRM 1200. Although it is also possible to plan for other types, there are cases where the calculated open and closed times do not match the cue sheet.
--- Brevet tracking ---
Brevet Manager track brevet progress by using created plan. On tracking mode, just by tapping, you can record arrival time and departure time. From the recorded time, calculate "saving time" from the plan, and show the time lag / advance.
In case of "+0: 30" is displayed, it means that it is advancing ahead of the 30 minutes plan ahead of schedule. When "-1: 00" is displayed, it means that an hour delay has occurred.
When arriving at point, arrival time is recorded by tapping "arrival" button. When departing, its time is recorded by tapping "departure" button in the same way. For departure, there is a function to perform automatic detection. This is the function to memorize the GPS location where "arrival" is tapped and to detect that "departed" when leaving a certain distance from there.
--- Brevet results ---
Arriving at the finish point or forcibly exit, traking will be end, and the result will be displayed in the results list. By looking at the result, you can retrospect history of your riding speed, stayed time, and saving time. And it are reusable parameter to next brevet plan.
支援平台：iPhone